Anti-Static Tape

Gen­er­ates less than 50V on unwind from the roll or removal from a stainless steel surface. Tape is imprinted with ESD symbol. 3/4" wide x 72 yds. roll.

For low static charge applications. Perfect for wave soldering, withstands 275°F exposure up to 45 min. Specs: Backing: Anti-Static co-polymer; Adhesive: Rubber; Thickness: 7 MIL; Length: 60 Yards. (USA)

For low static charge applications. Perfect for wave soldering, withstands 275°F exposure up to 45 min. Specs: Backing: Anti-Static co-polymer; Adhesive: Rubber; Thickness: 7 MIL; Length: 60 Yards. (USA)

For low static charge applications. Perfect for wave soldering, withstands 275°F exposure up to 45 min. Specs: Backing: Anti-Static co-polymer; Adhesive: Rubber; Thickness: 7 MIL; Length: 60 Yards. (USA)

For low static charge applications. Perfect for wave soldering, withstands 275°F exposure up to 45 min. Specs: Backing: Anti-Static co-polymer; Adhesive: Rubber; Thickness: 7 MIL; Length: 60 Yards. (USA)

Gen­er­ates less than 50V on unwind from the roll or removal from a stainless steel surface. Tape is imprinted with ESD symbol. 2" wide x 72 yds. roll.

1 mil anti-static treated polyimide film with pressure sensitive 1.5 mil silicone adhesive. Withstands temperatures up to 500 degrees F (260 degrees C).

1 mil anti-static treated polyimide film with pressure sensitive 1.5 mil silicone adhesive. Withstands temperatures up to 500 degrees F (260 degrees C).

Low Charging Transparent Cellulose Film (2.4 Mils Thick) with High-Tack Rubber Adhesive - Wescorp tape generates less than 50 volts when unwound from roll (at 73 degrees F, 45% RH average) making it safe to use around most ESD sensitive items.* Marked...

For general purpose applications. 2.4 mil (0.06 mm) total thickness. Cellulose film construction 10E9-10E10 ohms. Rubber based adhesive absorbs moisture. Adhesive surface resistivity 10E9-10E10 ohms. Temperature Range 10-50 degrees C (50-12 degrees F).

Low Charging Transparent Cellulose Film (2.4 Mils Thick) with High-Tack Rubber Adhesive - Wescorp tape generates less than 50 volts when unwound from roll (at 73 degrees F, 45% RH average) making it safe to use around most ESD sensitive items.

Low Charging Transparent Cellulose Film (2.4 Mils Thick) with High-Tack Rubber Adhesive - Wescorp tape generates less than 50 volts when unwound from roll (at 73 degrees F, 45% RH average) making it safe to use around most ESD sensitive items.