Wrist Straps, Heel & Foot Straps and Grounders

Grounds two wrist straps and conveniently mounts beneath the edge of most work benches.

Comes complete with ring connector and 15-ft. ground cord.

• Dual Wire Coil Cord provides redundancy - Even if 1 conductor is severed, operator has reliable path-to-ground w/ other wire• Superior resistor connection strain relief - Superior reliability. Greatly exceeds ESD S1.1 Bending Life Test. Testing at well


Eliminate need for conductive tile or floor mats. High molecular weight, acrylic polymer colloidal emulsion applies easily, dries in less than 1 hour. Use in cleanrooms, assembly or test areas.

Two dedicated circuits test foot ground straps and wrist straps. Simple green and red LED indicators show pass or fail. Includes metal base plate and cord for foot ground strap testing.• NIST Traceable

Premium grade, 3 layer sole resists wear. Will not mar shoes. Adjustable Elastic Blue Velcro. 24” ribbon. UL listed. 1 meg resistor.

Elastic D-Ring closure. Durable 3 layer sole with scrim. 24 inch, 8 strand ribbon. UL listed. 1 megohm resistor. Red elastic for visibility

Premium grade, 3 layer sole resists wear. Will not mar shoes. Adjustable Elastic Velcro. 24 inch ribbon. UL listed. 1 meg resistor.

Unique static prevention system consists of a grounding plug, stainless-steel backplated wrist strap, and 1M* lead set.

The conductive stretch wrist band adjusts to provide a custom fit and ESD protection in static-sensitive environment. Includes 6’ coil cord and alligator clip. Heel Grounding straps are designed to provide a continuous ground path between the user and the

This grounder features non-marring interior and exterior dissipative rubber, and a snap-lock fastening system making it easy to install and remove.

Designed to be used where wrist straps are not practical. Must be used with properly grounded ESD protective flooring. All foot ground straps have a non-marking inner layer so as not to harm user’s shoe. The 17200 has a foot contact strip attached with sn

Designed to be used where wrist straps are not practical. Must be used with properly grounded ESD protective flooring. All foot ground straps have a non-marking inner layer so as not to harm user’s shoe. The 17200 has a foot contact strip attached with sn

Designed to be used when maximum static control is required. Will not leave unsightly marks on your shoes. Made of stretch Velcro© for comfort. Has a 1.5" reversible 2 layer cup design. An 18" conductive tab and has a built-in 1 megohm resistor. Meets DOD