Fluke FLU-FLUKE-190-202/AM Specifications

Specifications:
Bandwidth 200 MHz
Number of Channels 2 channels
Real-time sample rate 2.5 GS/s
Inputs 2 scope plus DMM input
Independently floating isolated inputs Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground
Timebase range 2 ns - 2 min/div
Input sensitivity 2 mV-100 V/div
Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
Trigger Source Any scope input channel or external via DMM input
Glitch capture 8 ns
Scope measurements Cursor: 7
Automatic: 30
Maximum record length ScopeRecord mode: 30,000 pts
Scope mode: 10,000 pts per input
Persistence Digital persistence giving analog oscilloscope-like waveform decay
Waveform Compare Waveform reference with automatic Pass/Fail testing

DMM Specifications:
Meter inputs (also used as External Trigger Input for the Oscilloscope Mode) 4 mm banana inputs, fully isolated from scope inputs and from scope ground
Maximum Resolution 5000 counts
Measurements Vdc, Vac rms, Vac+dc rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter)
Memory

190-XX2, 2 Channel Internal Memory:
Screen + Setup: 30
Recording: 10
Display 153 mm full color LCD with fast update rate

Environmental Specifications
Operating Temperature 0°C to 40°C Including Batteries
0°C to 50°C Excluding Batteries
Storage Temperature -20°C to +60°C
Operating Altitude Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V

Safety Specifications
Electrical Safety

1,000V CAT III/600V CAT IV (EN61010-1)

Mechanical & General Specifications
Size 270 x 190 x 70 mm
Weight 2.2 kg
Li-Ion Battery BP290 2400 mAh battery up to 4 hours included standard. Up to 8 hours using optional BP291